Table of Contents
Advertisement
MI Path
Configuration->Connect->Frame Relay
7. Set the Interface parameter to T1/PRI_Port 1 to identify the Frame Relay interface on the EXTender
7000. Note, we are limited to using only T1 Port 1 for Frame Relay.
Note: There can only be one network interface when using frame relay, meaning there is no Primary or
Secondary interface.
8. Set the LMI Type parameter to Q.933_Annex_A or ANSI_ Annex_ D as specified by your service pro-
vider.
TM
EXTender
7000 Installation Guide
Figure 3-27: Frame Relay Menu
Page 45
Advertisement
Table of Contents
