Working With The Falling Force By Lowering The Attachment; Working With The Falling Force By Lowering The Machine; Fully Lowering The Stabilizer Blade; Protecting The Stabilizer Legs/Blade Against Shocks - Wacker Neuson ET16 Operator's Manual

Fig. 179
Fig. 180
Fig. 181
Fig. 182
BA ET16 de* 1.0 * et16b510.fm

Working with the falling force by lowering the attachment

Do not use the falling force of the attachment as a hoe, hammer or pile-
driver.

Working with the falling force by lowering the machine

Do not use the dead weight of the machine for work.
Use the force of the hydraulic cylinders exclusively.

Fully lowering the stabilizer blade

Apply the full weight of the machine over the entire width of the stabilizer
blade when using it for stabilization.

Protecting the stabilizer legs/blade against shocks

The dozer blade or dozer blade cylinder can be damaged if the dozer
blade hits against obstacles.
Operation 5
5-47