Wacker Neuson ET16 Operator's Manual page 119

1
A
Fig. 124
Fig. 125
B
Fig. 126
BA ET16 de* 1.0 * et16b510.fm
Position
1
2
1. Raise the control lever base.
2. Make sure that the lever A located to the left under the operator's seat
is in position 1.
2
3. Lower the control lever base.
4. Set the dozer blade to the desired position:
Function
Raise stabilizer blade
Lower stabilizer blade
Information
In order to ensure maximum stability during work:
► Only perform work with an extended telescopic travel gear.
► Lower the stabilizer blade and turn out the extensions.
Function
The dozer blade is actuated.
The telescopic travel gear is actuated.
Position
Pull lever B backward
Push lever B forwards
Operation 5
5-17