5.11 Work operation
Danger zone
BA ET16 de* 1.0 * et16b510.fm
•
The danger zone is the area in which persons are in danger due to the
movements of the machine, attachment or load.
•
The danger zone also includes the area that can be affected by falling
material, equipment or by parts that are thrown out.
•
The danger zone on a slope is different from the one on a level surface
(secure the load). See chapter "Operation, driving on slopes".
•
Stop machine operation immediately if persons do not stay clear of the
danger zone.
•
Seal off the danger zone should it not be possible to keep a sufficient
safety distance.
•
Extend the danger zone sufficiently in the immediate vicinity of
buildings, scaffolds or other elements of construction.
Danger zone with a bucket
Danger zone with a bucket and a safety distance of 1.5 m (59 in)
Danger zone with a grab (for example for picking up a pipe)
Danger zone with a grab and a safety distance of 1.5 m (59 in)
Safety distance of 1.5 m (59 in)
A
Fig. 175 (symbolic representation)
Operation 5
A
A
A
A
5-45