Lights/Signalling System; Working Lights - Wacker Neuson ET16 Operator's Manual

5.6

Lights/signalling system

Working lights

A B
Fig. 113 (symbolic representation)
C
Fig. 114
BA ET16 de* 1.0 * et16b500.fm
WARNING
Accident hazard due to blinded motorists!
Working lights can blind motorists. This can cause serious injury or death.
► Stop machine operation if motorists are blinded.
► Take up operation again only when sufficient illumination of the
working area is ensured without blinding motorists.
Position Designation
A Boom light
B Front and rear roof lights (option)
Information
With the roof-mounted spotlight option, all work lights are switched on
and off together.
The switch is located on the switch panel.
Working lights
On
Off
Information
Switch on the working lights in conditions of poor visibility. If illumination
still is not sufficient, use external lights. If this is yet not enough to
illuminate the job site sufficiently, stop machine operation and only start it
again when sufficient illumination can be ensured.
Operation
Press the switch C down
Press the switch C up
Operation 5
5-9