2 Safety
Modifications and spare parts
Protective structures
2-16
•
Do not modify the machine and the work equipment/attachment (for
example the safety equipment, lights, tires, straightening and welding
work).
•
Modifications must be approved by the manufacturer and performed by
an authorized service center.
•
Use only original spare parts.
•
The cabin, rollbar and protective screen are tested protective struc-
tures and may not be modified (for example no drilling, bending,
welding).
•
Perform a visual check according to the maintenance plan (for
example check the fastenings for damage).
•
If damage or defects are detected, have them immediately checked
and repaired by an authorized service center.
•
Have retrofitting work only performed by an authorized service center.
•
Replace self-locking fasteners (for example self-locking nuts) by new
ones after removing them.
BA ET16 de* 1.0 * Safety_01_0.fm