Wacker Neuson ET16 Operator's Manual page 146

5 Operation
H
K
J
I
Fig. 174
5-44
Mount
1. Install a bucket only if it is positioned on level ground with the flat side
D facing downward.
2. Stop and park the machine. Stop the engine. See "Preparing
K
lubrication".
3. Apply grease to the pins and articulations before inserting them.
F
4. Start the engine.
5. Straighten the stick so that bores D and E are flush.
E
6. Stop the engine. Raise the control lever base.
7. Insert pin F.
8. Actuate the stick cylinder until bores H and I are flush.
9. Stop the engine. Raise the control lever base.
10.Insert pin J.
11.Install linch pins K.
BA ET16 de* 1.0 * et16b510.fm