Glossary - Wacker Neuson ET16 Operator's Manual

1 Foreword

Glossary

Attachment
Working lights
Towing
Canopy
DOC
DPF
Operating company/person
Operators
Machine
Machine operation
Lift capacity table
Cab/cabin
Crawling speed
Hose rupture
Check the threaded fittings for
tightness
Visual aids
Control lever base
Tier III/Tier IV/DOC/DPF
Load diagram
Loading weight
1-4
All exchangeable equipment (for example buckets) released by Wacker Neu-
son and developed for work with the machine.
The lights on the roof, chassis and boom are referred to as working lights.
The excavator is towed out of an immediate danger zone (railroad crossing or
job site, for example).
Open unglazed driver's cab
Diesel oxidation catalytic converter; removes carbon monoxide and residues
of unburned fuel from the exhaust fumes
Diesel particulate filter; burns soot particles in the exhaust fumes
A company (or person) operating the machine. This can be a job site operating
company, for example.
Person performing machine travel or operation.
Unless otherwise specified, the term "machine" refers to the excavator
described in this Operator's Manual. In some cases the machine is also
referred to as excavator to avoid confusion with other vehicles.
All work (for example machine travel, moving material, daily maintenance) an
operator is allowed to or has to perform in connection with the machine. The
term "machine operation" does not include maintenance only a Wacker
Neuson service center is allowed to perform.
The maximum weight which may be lifted in excavating operations. If the
upper carriage is rotated, pay attention to the values of the load diagrams.
Enclosed glazed cab
Perform machine travel as slowly as possible and jerk free.
Hydraulic oil under pressure escapes from a hydraulic hose.
• Operator: Visually check the screwed connections and corresponding
elements/subassemblies visually or manually (without using tools) for
tightness
• Authorized service center: if an attachment has to be used in the event of
abnormalities for the control procedures, restore the screwed connection
with new materials (screws, nuts)
Visual aids are, for example, rearview mirrors, cameras, but also persons
assisting the operator during machine operation.
The foldable control lever base on the left.
The machines comply with different exhaust-gas standards depending on
optional equipment. Engine variants are described separately if there are
engine-specific differences (for example regarding operation) .
Specifies the maximum load at a given boom extension with which the upper
carriage may be rotated by 360° and the excavator may travel in creep gear
with the stabilizer blade raised without tipping over.
The actual weight of the machine at the beginning of transportation. This
weight refers to machines which are equipped exclusively with options
approved by Wacker Neuson.
BA ET16 de* 1.0 * et16v100.fm