Telescopic Travel Gear - Wacker Neuson ET16 Operator's Manual

Telescopic travel gear

BA ET16 de* 1.0 * et16b510.fm
WARNING
Crushing hazard due to tipping over of machine!
A tipping machine can cause serious injury or death.
► Only perform work with an extended telescopic travel gear.
► Performing machine travel with a retracted telescopic travel gear is
only allowed for machine travel over very short distances through
passages. Pay attention to the reduced stability.
► Raise the boom about 20 – 30 cm (8 – 12 in) off the ground and
position it straight ahead at the center of the machine.
If a hose bursts on the telescopic cylinder, lower the boom immediately
to prevent the machine from tipping over.
► Extend and retract the travel gear only on horizontal, level and firm
ground.
► Retract or extend the telescopic travel gear completely.
WARNING
Danger of crushing when retracting the telescopic travel gear!
Retracting and extending the telescopic travel gear can cause serious
crushing of body parts and death.
► Do not allow anyone to stay in the danger zone.
► Retract or extend the telescopic travel gear completely.
NOTICE
Damage to machine when travelling through passages.
► The dozer blade and telescopic travel gear must have the same width.
Operation 5
5-19