Connecting And Disconnecting Hydraulic Couplings; Hydraulic Connections - Wacker Neuson ET16 Operator's Manual

5 Operation

Hydraulic connections

A B
Left
Fig. 172
5-38

Connecting and disconnecting hydraulic couplings

1. Stop and park the machine. See "Preparing lubrication".
2. Position the boom straight ahead at the center of the machine.
3. Lower the stabilizer blade to the ground.
4. Turn the starting key to position 1.
5. Move the control lever or the slide switch of the hydraulic circuit in all
directions repeatedly.
6. Remove the starting key and carry it with you.
➥ The grab hose couplings can now be coupled and uncoupled.
Connection
A
A
B
Information
Follow the instructions in the Operator's Manual of the attachment
manufacturer for connecting the hydraulics to the attachment.
Right
Stick (left/right)
AUX I
Large return line
BA ET16 de* 1.0 * et16b510.fm