Canopy/Cabin Nameplate; Nameplate For Fops-Screen Category I; Nameplate For Fops-Screen Category Ii - Wacker Neuson ET16 Operator's Manual

3 Introduction
Fig. 6
Fig. 7
Fig. 8
3-8

Canopy/cabin nameplate

The type label is located on the B pillar on the left.

Nameplate for FOPS-screen category I

The type label is located inside the light cover on the left.

Nameplate for FOPS-screen category II

The type label is located on the right-hand side of the protective screen.
BA ET16 de* 1.0 * et16e300.fm