Wacker Neuson ET16 Operator's Manual page 228

9 Technical data
9-10
Precise indications on the vibration degrees cannot be made for the
machine.
Determination of vibration level for the three vibration axes.
• Under typical operating conditions, use the average vibration values
measured.
• In order to obtain the estimated vibration value for an experienced
operator on level ground, subtract the factors from the average
vibration value.
• In case of an aggressive working method or difficult terrain, add the
environmental factors to the average vibration level in order to obtain
the estimated vibration level.
Note:
For further vibration indications, refer to the indications in ISO/TR 25398
Mechanical Vibrations – Directive on Estimation of whole-body vibration
during operation of earth moving machines. This publication uses
measuring values of international institutes, organizations and
manufacturers. It contains information on whole-body vibration for
operators in earth moving machines. For more information on the vibration
values of the machine, refer to Directive 2002/44/EC of European
Parliament and Council on minimum health and safety requirements
regarding exposure of workers to risks arising from physical agents
(vibration).
It explains the values for vertical vibration under heavy operating
conditions.
BA ET16 de* 1.0 * et16t900.fm