Adding Hydraulic Oil - Wacker Neuson ET16 Operator's Manual

Adding hydraulic oil

B
Fig. 240
Fig. 241
BA ET16 de* 1.0 * et16w710.fm
1. Open the engine cover.
2. Open air cleaner C slowly to release the pressure inside the hydraulic
oil tank.
3. Remove the air cleaner B.
4. Add hydraulic oil up to the corresponding mark.
5. Check the hydraulic oil level on sight glass A.
6. Add if necessary and check again.
7. Screw in the air cleaner B tightly.
8. Close and lock the engine cover.
Environment
Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
Maintenance 7
7-39