Lifting gear applications
BA ET16 de* 1.0 * Safety_01_0.fm
•
The machine must be certified for lifting gear applications.
•
Observe the national regulations for lifting gear applications.
•
Lifting gear applications are procedures involving raising, transporting
and lowering loads with the help of lifting and fastening gear.
•
The help of an accompanying person is necessary for fastening,
guiding and removing the load.
•
There must be nobody under the load.
•
Stop the machine immediately and stop the engine if persons enter the
danger zone.
•
Use the machine for lifting gear applications ONLY if the mandatory
lifting gear (for example a joint rod and load hook) and safety
equipment (for example optical and acoustic warning devices, hose
burst valve, stability table) is installed and functional.
•
Use only lifting and fastening gear certified by a test/certification body,
observe the inspection intervals (Use only chains and shackles. No
belts, slings or cables).
•
Do not use any lifting and fastening gear that is dirty, damaged or not
of sufficient size.
•
Do not interrupt the work process with a load attached.
Safety 2
2-9