Coolant Temperature; Fuel Tank Capacity; Operating Hour Meter; Maintenance Meter - Wacker Neuson ET16 Operator's Manual

Symbol
BA ET16 de* 1.0 * et16i400.fm
Designation

Coolant temperature

The control lamp A lights up if the segments reach the red area.
• Let the engine run at idling speed without any load.
• Wait until the temperature drops and the indicator light goes out.
• Stop the engine.
• Check the coolant level.

Fuel tank capacity

Refuel if the segments reach the red range.

Operating hour meter

Counts the engine operating hours with the engine running.

Maintenance meter

Counts the remaining engine operating hours down to the next
maintenance work due.
If less than 10 hours are displayed, the wrench symbol flashes.
Switch-over between the operating hour meter and the mainte-
nance counter
Putting into operation 4
4-29