Set Binning; Set Exposure Auto - HikRobot GigE User Manual

Note
The pattern of the test image 1 may differ by device models.

10.7 Set Binning

The purpose of setting binning is to enhance sensibility. With binning, multiple sensor
pixels are combined as a single pixel to reduce resolution and improve image brightness.
Click Binning Selector, and set Binning Horizontal and Binning Vertical according to
actual demands.
Note
● Binning Horizontal is the image's width, and Binning Vertical is the image's height.
● If the device's vertical resolution is 1, and then there is no Binning Vertical.
● The binning function may differ by device models.

10.8 Set Exposure Auto

The device supports 3 types of exposure mode, including Off, Once and Continuous. Click
Acquisition Control → Exposure Auto, and select Exposure Auto according to actual
demands.
● Off: The device exposures according to the value set in Exposure Time (µ s).
● Once: The device adjusts the exposure time automatically according to the image
brightness. After adjusting, it will switch to Off mode.
● Continuous: The device adjusts the exposure time continuously according to the image
brightness.
GigE Line Scan Camera User Manual
Figure 10-20 Set Binning
63