Energetics POWER RUN 7.9 HRC Owner's Manual page 6

Hide thumbs Also See for POWER RUN 7.9 HRC:

Available languages

SET UP USER INFORMATION

For the first time use of the treadmill, the Lower LCD will show a blinking U1 and will show factory default setting

values of user weight, height, age and target heart rate. Press the speed UP/DOWN buttons to choose the USER

ID from U1 to U9 and press the STOP/ENTER button to assign your user ID.

SET USER GENDER

After assigning your user ID, the gender icon will display on the Upper LCD. Press the speed UP/DOWN buttons

to switch between male and female icon then press the STOP/ENTER button to select your gender.

SET USER WEIGHT

After setting the user gender, The Upper LCD will display W. The TIME LCD display now shows the blinking

factory setting user weight 68 kg or 150 lb. Press the speed UP/DOWN buttons to adjust the user weight correctly

and press STOP/ENTER to set the user weight.

SET USER HEIGHT

After setting the user weight, The Upper LCD will display H. The CALORIES LCD display now shows the blinking

factory setting user height 160 cm or 5'03". Press the speed UP/DOWN buttons to adjust the user height correctly

and press STOP/ENTER to set the user height.

SET USER AGE

After setting the user Height, The Upper LCD will display A. The INCLINE LEVEL LCD display now shows the

blinking factory setting user age 35. Press the speed UP/DOWN buttons to adjust the user age correctly and press

STOP/ENTER to set the user age.