Internally Without Involving 3Rd Party Application - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

System Configuration
Allowing KIRK Wireless Server to Route MSF between Handsets Internally
without Involving 3
Polycom, Inc.
To Allow or Disable Subscriptions
From the System menu, go to Configuration and on the System
1
Configuration page choose one of the following options:
Allowed-wildcard (default option) : KIRK Wireless Server 8000 will
a
autocreate a new user with the corresponding IPEI number for the
handset. By default the created user will be disabled. To configure the
user fill in the corresponding values in Create or Change User (see"
"section) window and make sure you select Allow from the Service
Status drop-down list.
Allowed- users can be subscribed to the system.
b
Disallowed- users cannot be subscribed to the system.
c
Click Save to write the change to the system.
2
Figure 4-4 Allowing subscriptions settings
rd Party Application
This option enables KIRK Wireless Server 8000 to route messages internally
between handsets without involving a 3
To Allow KIRK Wireless Server to Route MSF between Handsets Internally without
rd
Involving 3 Party Application
From the System menu, go to Configuration and on the System
1
Configuration page under Allow KIRK Wireless Server to route MSF
between handsets internally without involving 3
section, click Enabled or Disabled.
Click Save write the changes to the system.
2
Figure 4-5 Allowing KIRK Wireless Server to Route MSF between Handsets Internally
without Involving a 3
rd
Party application.
rd
Party Application
General System Settings
rd
party applications
18