Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 66

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
61
Parameter Details
DTMF
Send as RTP
Signalling
Offered rfc2833
payload type
Send as SIP
Info
Tone Duration
(msec)
Message
Enable
waiting
Indication
indication
Enable
Subscription **
Subscription
Expire (sec) *
Packet Duration
Media
(msec) *
Media Type of
Service * **
Port Range Start
* **
Description
Enable the check box (Real-Time
Transport Protocol), if you want
the keypad signalling sent as RTP
packets with DTMF code.
Note. Some SIP servers
understand both methods, so if
you enable both methods for
sending DTMF, then ciphers will
be sent twice.
Payload type for rfc2833 in SDP
offers. The default value is 96.
Enable the check box, if you want
the keypad signalling sent as SIP
INFO.
Enter the time length of the tone in
milliseconds. The default value is
270.
Enable the check box, if you want
to display MWI in the handset..
Enable the check box, if you want
to subscribe to MWI indications
from the SIP proxy.
Enter the number of seconds
before MWI subscription will be
renewed. The default value is
3600.
It defines the duration of the RTP
media stream packets. Select
between 10, 20 and 40 msec.
IP type of service for voice. The
default setting is 184.
Port range start used for RTP. The
default value is 58000.
SIP Configuration
Polycom, Inc.