Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 65

SIP Configuration
Polycom, Inc.
Parameter Details
Proxies Proxy 1..4 **
Authentication Default User
Default
Password
System Management
Description
You can define up to 4 SIP proxies.
When defining a proxy, please
specify the priority, weight and
URI of the proxy.
If you have more than one SIP
server, then the addresses must be
written in the Proxy 1..4 fields.
If more than one has the same
Priority, then the weight is used
for load sharing. The sum of
weights for SIP server on one
Priority level should be 100.
SIP server(s) with priority 1 is the
main call handler, if that goes out
of server then KIRK Wireless
Server will register the SIP users
on SIP server(s) with priority level
of 2.
Please note if a server goes down
and the KIRK Wireless Server
doesn't have outgoing calls, it will
not know and incoming calls from
the next level of SIP server will not
be answered. As soon as the first
outgoing call fails, then the KIRK
Wireless Server will react to
incoming call from the new SIP
server on the next priority level.
Note: The proxy is the SIP URI of
the SIP-proxy. The KIRK Wireless
Server 8000 and KIRK Wireless
Server 2500 will route all outgoing
SIP signalling to the proxy, e.g. SIP
registrations and outgoing calls.
Default user name used for SIP
authentication.
Enter password.
Note: If no handset specific
authentication user
name/password is configured,
handsets registered on the KIRK
Wireless Server 8000 or KIRK
Wireless Server 2500 will use the
default user name/password for
authentication.
60