Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 57

Analogue Settings
Polycom, Inc.
Table 6-1 Analogue Settings
Parameter Details
ECAN State (On/Off)
NLP State (On/Off)
Mode:
•
•
•
•
CPT (Call Busy low frequency
Progress
Tone)
Busy high frequency
Busy tone on time (ms)
Busy tone pause time (ms)
Dial low frequency (Hz)
Dial high frequency (Hz)
Dial tone on time (ms)
Dial tone pause time (ms)
Detect tolerance (ms)
IWU Gain Tx(dB)
Rx (dB)
Limits the signal when it
is active
Reserved
Sends sign noise when it
is active
Sends white noise when
it is active
System Management
Description
Specifies whether echo
cancellation is enabled or
disabled.
Specifies whether the
non-linear processor is
enabled or disabled.
Determines type of comfort
noise that is used.
The minimum frequency of
the range within which CPT is
detected.
The maximum frequency of
the range within which CPT is
detected.
Specifies the length of time
the tone is heard.
Specifies the length of time
between audible tones.
The minimum frequency of
the dial tone range.
The maximum frequency of
the dial tone range.
Specifies the length of time
the tone is heard.
Specifies the length of time
between audible tones
Specifies detect tolerance for
both busy tone pause and
dial tone pause.
The transmitter gain in dB.
The receiver gain in dB.
52