Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 51

User Registration
Note
Polycom, Inc.
Repeat steps 14 to 17 from "" section.
3
Only handsets that are developed and manufactured by Polycom
Denmark support KIRK messaging and can be used as DECT to
DECT handsets. Other handsets (including Polycom Kirk 2010) can
not be used as DECT to DECT handsets because they do not support
the Messaging protocol.
To Register New SIP Line Type Users
Repeat steps 1 to 6 from
1
section.
In the SIP Username field, type the local number.
2
In the CFU Number field, type the number of the handset you want your
3
calls to be redirected to.
In the SIP Auth Username field, type the authentication username, if
4
required.
In the SIP Auth Password filed, type the authentication password, if
5
required.
From the Service Status list select Allow in order to activate the user
6
services. In case you want to disable the service status, select Disable.
In the Access Code field, type the authentication code (AC). This field is
7
optional.
From the Line Type list, select SIP.
8
Repeat steps 14 to 17 from
9
Users"section.
Handset Registration and Subscription
"To Register New Analogue Line Type
"To Register New Analogue Line Type
Users"
46