Msf Broadcast - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
Note

MSF Broadcast

67
10 In the Tone and Time-out pane specify the type of tone the receiver
handset sends when receiving a text message.
11 In the Action & Response pane, specify the method through which you
wish to send the message. For more details see Api specifications.
To obtain the API specifications, please contact Polycom (Denmark).
12 In the Response Enabler Mask pane, specify the type of response to the
action.
13 Use the Setup Spec 1 pane to select the method through which you wish to
receive the message.
14 Under MSF Format III, click SMS Setup Request to send the message. If
SMS Setup Request is busy click Connection CISS Release to release the
connection.
15 Select the Monitor check box to receive a status on both the sent and
received messages or deselect the Monitor check box if you wish to receive
status only on the sent messages.
16 Click Clear to clean the Monitor window (optional).
To Send MSF Broadcast Messages from KIRK Wireless Server 8000 or KIRK
Wireless Server 2500 to a Handset
On the menu window of the WEB page, click the Apps. Demo tab and
1
then click MSF Broadcast.
Figure 6-8 MSF Broadcast tab
MSF Messages (Message Service Function)
Polycom, Inc.