Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 38

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
33
To Update Base Station Firmware
On the System menu, click Update Firmware.
1
Figure 4-19 Update Base Station Firmware
Select the Update Base Station Firmware radio box.
2
Click the Load Base Station Firmware button. A new window is
3
displayed, showing a matrix containing all possible RFPs' locations.
Select from the Type combo the type of RFP (RFP5 or RFP4 (Infineon) from
4
SW PCS09_). The checkbox(es) in the matrix corresponding to the RFP
available will be enabled.
RFP Firmware Update by means of built-in Firmware
Make sure the Use built-in Firmware checkbox is selected. In this case,
1
RFPs will use an embedded code from the KIRK Wireless Server software.
Update Firmware
Polycom, Inc.