Base Station Settings - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide

Base Station Settings

53
On the Base Stations menu you find information about the settings of each base
station in the system.
Figure 6-3 List Base Stations tab
To Read Base Station Settings
To populate the table with system information, click the List Base Station
a
tab.
The following information is displayed.
Parameter
RFP
PCS
Part Number
Region
Time slot in air
RPN in Air
Cable Delay
Shelf
Card No.
Table 6-2 Base Station Settings
Description
Radio Fixed Part number 0-511
The base station software version
Part number that identifies the base
station software.
The region that determines the base
station settings.
There are 12 air time slots in each
direction (numbered 0-11). If set to "Even",
the base station uses an even time slot
(0,2,4,6,8,10). If set to "Odd" then the
base station will use an odd time slot
(1,3,5,7,9,11). If set to "Follow RPN", the
base station will use even time slots if it
has an even RPN; if it has an odd RPN
then the base station will use odd time
slots.
Radio Part Number in Air. The number the
base station sends. (0-255) For more
information, see
page 54
The time it takes the signal to reach the
base station.
The number of the shelf to which the base
station is connected. (1-8)
Specifies the card number. (1-8)
Base Station Settings
"Radio Part Numbers" on
Polycom, Inc.