Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 35

Corporate Phonebook Configuration
Note
Note
Polycom, Inc.
In the Filter field, type the filter used for the LDAP query. The
3
(objectClass=person) filter can be used successfully in most cases.
In the Attributes* field, type the LDAP attributes you want to query the
4
LDAP for, separated by a comma, e.g.displayName,telephoneNumber,
mobile.
In the Number attributes field type LDAP attributes that will be used to
5
dial, e.g. telephoneNumber,mobile
In the Attribute names field, type the attribute names you want to assign
6
to the attributes specified above, separated by a comma, e.g.
Name,Phone,Mobile
In the Replace prefixes field, type the phone number prefixes to replace or
7
strip, separated by a comma.
If the phone number is +45678912345, and the user has the extension 12345,
specify "+456789" in the Replace prefixes field.
If the phone number is "+456789123456" and "06789123456" must be dialled,
then specify "+45=0".
In the Load interval* field, type the interval in seconds in order to query
8
the LDAP server for updates.
Click Save to write your configuration data
9
The phonebook will be inaccessible while retrieving phonebook data from a
remote LDAP-serv. The refresh interval (the interval at which the central
phonebook data is being copied from the LDAP to the KIRK Wireless Server)
should be chosen with care. The combination of a slow LDAP-server/slow
LDAP-server connection and a high number of entries in the corporate
phonebook ( > 10,000) should be configured with a long refresh interval, e.g.
once-a-day.
General System Settings
to the system.
30