Changing Emd Protocol Access Password - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide

Changing EMD Protocol Access Password

25
Figure 4-13 Setting Date and Time from Network
Select the Network radio box.
2
Type the NTP Server network address.
3
Select the desired Time Zone from the drop down list.
4
You can further configure the Posix Timezone String or else leave the
5
default value.
Click Save to write the NTP date and time to the system.
6
To change the EMD protocol access Password (also known as "SIO password")
On the System menu, click Network.
1
Figure 4-14 Changing EMD Protocol Access Password
Under EMD protocol access Password, type the current password in the
2
Old Password field.
Type the new password in the New Password field, and then re-type it in
3
the Confirm New Password field.
Click Save to modify the password, and then click Close.
4
Network Settings
Polycom, Inc.