Setting The Outgoing Analogue Line Prefix; Allowing Subscription; Allowing Kirk Wireless Server To Route Msf Between Handsets - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
Note

Setting the Outgoing Analogue Line Prefix

Note

Allowing Subscription

17
•

'Allowing KIRK Wireless Server to Route MSF between Handsets

Internally without Involving 3rd Party
• 'Allowing or Blocking New
• 'Setting the Ringing
• 'Setting the Security
• 'Application Interface
• 'Call Configuration
• 'SIP Users Feature Codes
Click the Refresh button to read the settings from the system.
The Outgoing Analogue Line Prefix specifies which start digit(s) the KIRK
Wireless Server will look for, in an outgoing call. If the KIRK Wireless Server
sees the digit(s), then it will insert a delay between the prefix digit(s) and the
rest of the dialled number.
To set the Outgoing Analogue Line Prefix
On the System menu, click Configuration. The System Configuration
1
page is displayed.
Outgoing Analogue Line Prefix settings
Figure 4-3
Type a prefix in the Prefix field, and then click Save to write it to the
2
system.
The system dials the outgoing line prefix cipher, and then waits for the dial
tone before sending the remaining digits of the number.
To subscribe handsets to the system the system must be set to allow
subscriptions. For detailed information about how to subscribe handsets, see
the user guide for specific handsets. You can find the handset user guides on
www.polycom.com
Application'
Calls'
Mode'
Level'
settings'
settings'
settings'
System Configuration
Polycom, Inc.