Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 67

SIP Configuration
Note
Polycom, Inc.
Parameter Details
Call status
Make the desired changes and click Save to save your SIP configuration
2
data.
*) - Required field, **) - Restart required for the setting to be applied
Description
Define the priorities of codecs.
G726-32/8000: The standard 32
kbit/second ADPCM used by the
DECT standard between PP and
RFP. We also use it on the lines
between RFP and KIRK Wireless
Server and on the back plane
between the different interface
Codec priority *
cards (BIF08, AB08, AB16 &
MR32).
PMCA/8000 is G.711 A-law.
PCMU/8000 is G.711
Note: For international (POTS)
calls between a nation using
and a nation using A-law, the
international line shall use A-law.
Require Require that the other party sends
symmetric RTP RTP from the same UDP port as it
** will receive RTP.
Enable check box to receive
Play on-hold
on-hold tone when placed on
tone
hold.
Display status Enable check box to receive status
messages messages in the handset display.
Pressing pound key dials number
in overlap dialing.
Note: SIP is an American designed
telephony standard, so it needs a
complete telephone number
before it can start call routing.
There are two ways for the SIP
'#' key ends interface to assume the number is
overlap dialing completed.
1. If no new digit within 4 seconds
after the last, then the number is
considered completed. This
method is hard coded and always
enabled.
2. You can also enabled "#" as a
completion sign.
Call waiting Enable call waiting.
System Management
μ
-law.
μ
-law
62