Polycom KIRK Wireless Server 8000 Interface Configuration Manual page 27

System Configuration
Polycom, Inc.
Figure 4-10 Call Configuration settings
On the Call Configuration section select the Enable Internal CLIP and
2
Presentation check-box if you want to receive clip and presentation on
internal calls (call from one handset to another on the same KIRK Wireless
Server). When a user is created/changed you can write a text in the
presentation field (see
Select one of the following Internal Voice Call Switching Levels to switch
3
local calls (users on the same KIRK Wireless Server) without involving the
PBX:
• Only Between DECT to DECT users
• Between DECT to DECT and all types of local users - enables users
subscribed as DECT_TO_DECT to call/receive calls from users subscribed
as SIP users and analogue users.
• Internal Setup from PP will result in local switched call - enables users
subscribed as SIP users and analogue users to make internal calls if they use
the INT key to dial the number (40xx PP) and R key (on 50xx, 60xx and
70xx) + Between DECT to DECT and all types of local users level (If you
choose "Internal Setup from PP will result in local switched call" level then
"Between DECT to DECT and all types of local users" level is automatically
chosen as well).
• Level 3 - not implemented yet.
• All local calls - all calls will be routed internally regardless of interface type
+ "Between DECT to DECT and all types of local users" level + "Internal
Setup from PP will result in local switched call" level + Level 3
"User Registration" on page 40).
General System Settings
If you
(
22