Setting Up The Corporate Phonebook In The Handsets - Polycom KIRK Wireless Server 8000 Interface Configuration Manual

Polycom KIRK Wireless Server 8000 & KIRK Wireless Server 2500 Configuration Guide
Note

Setting up the Corporate Phonebook in the Handsets

31
To set up a local ADAM (Active Directory Application Mode) LDAP in order
for a KIRK Wireless Server 8000 to connect and retrieve LDAP data from it,
click the link below and follow the guide to download ADAM and create a
new directory instance:
http://www.codeproject.com/KB/aspnet/ADAM_and_LDAP_ClientNet.
aspx
To set up the KIRK Wireless Server 8000 to connect to the LDAP instance
(after creating the Superuser or the ServiceAccount), do the following:
Browse to your KIRK Wireless Server 8000 web interface.
1
On the Authentication page, enter the User Name (admin) and the
2
Password (kws8000).
On the System menu, click and then Phonebook.
3
Tick the LDAP radio button and enter the IP address in the URI field of
4
your PC where you have ADAM installed and running.
The following details are used:
Bind user: CN=superuser,CN=People,CN=Sandbox,DC=ITOrg
Bind password: As described in the ADAM Installation Guide, you reset the
Superuser password by choosing a different password.
Base: CN=Sandbox,DC=ITOrg
Filter: (objectclass=person)
Attributes: sn,telephoneNumber
Number attributes: telephoneNumber
Attribute names: Name, Phone
Replace prefixes: National prefixes and or local prefixes can be stripped (e.g.
+4576,76,+45)
Limitations:
• 40.000 entries maximum
• 5 attributes maximum
Before you can utilize the search via the KIRK Wireless Server 8000 phonebook,
activate the long key press function to support the MSF function.
• Press the Menu button.
• Press the Mute key to select Set Up.
• Scroll to Advanced via the left and right soft keys and press the Mute
button.
• Scroll to Long Key via left and right soft keys and press the Mute button.
Corporate Phonebook Configuration
Polycom, Inc.