Table of Contents
Advertisement
Configuring the Base Station
To set up your BC9xx0 cradle you must:
1. Physically install the cradle.
2. Make all system connections.
3. Configure the BC9xx0 cradle.
Mounting the BC9xx0 Cradle
The cradle package contains the following items:
BC9xx0 Base Station (with Desktop Mounting
Bracket installed)
BC9xx0 Quick Reference Guide
(this manual)
The cradle can be either mounted on a flat surface for desktop usage or
affixed vertically to a wall.
Mounting Brackets
The cradle comes with two different mounting brackets. The appropriate
bracket is used depending on whether the cradle will be mounted on a hori-
zontal or vertical surface. When shipped, the cradle has the Desktop Mount-
ing Bracket installed. For vertical installation, the Wall Mounting Bracket
must be attached instead.
Figure 1. Mounting Brackets
Tab
•
•
Product Reference Guide
Ribs
Desktop Mounting Bracket
(Horizontal )
Desktop mount bracket has ribs to keep the scanner in place when the
cradle is horizontal.
Wall mount bracket contains bosses to keep the scanner in place when
the cradle is vertical.
Configuring the Base Station
1 Metal Mounting plate
1 Wall Mounting Bracket
Bosses
Tab
Wall Mounting Bracket
(Vertical)
Tab
9
Advertisement
Table of Contents
