Setting Up The Reader; Configuring The Base Station; Changing The Base Station Position - Datalogic GBT4100 Quick Reference Manual

Follow the steps below to connect and get your reader up
and communicating with its host.
1. Configure the Base Station starting on this
page.
2. Charge the Batteries (see page 8).
3. Link to the Base Station (see page 13).
4. Select the Interface Type (see page 16).
5. Configure the Reader starting on page 30
(optional, depends on settings needed).

Configuring the Base Station

The base charger/station may be configured in desk
application to hold the reader in two different positions,
either a horizontal or standing position, in order to provide
the most comfortable use depending on needs.
Standing

Changing the Base Station Position

The base station is configured by installing one of two
sets of mechanical parts that come with the cordless kit.
The default mounts (shown below) provide three options:
vertical (wall) mounting, standing (45°), or horizontal
mounting with a higher mechanical retention of the scan-
ner. Use the other mounts only for horizontal mounting,
with lower retention of the scanner. The different parts
may be interchanged to customize retention preferences.
Quick Reference Guide

Setting Up the Reader

Horizontal
1