Set Key Sequence Header; Set Key Sequence Terminator - Datalogic PowerScan 9501-AR Series Product Reference Manual

Enter/Exit Programming Mode

Set Key Sequence Header

Sets the header for keyboard composed strings.
Set key sequence header

Set Key Sequence Terminator

Sets the terminator for keyboard composed strings.
Set key sequence terminator
276
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by 32 digits from the Alphanu-
Appendix D, Keypad
meric characters in
digits must be the hexadecimal ASCII representation
of the desired characters.
If less than the expected string of 16 characters are
selected, scan the ENTER/EXIT bar code to termi-
nate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by 32 digits from the Alphanu-
Appendix D, Keypad
meric characters in
digits must be the hexadecimal ASCII representation
of the desired characters.
If less than the expected string of 16 characters are
selected, scan the ENTER/EXIT bar code to termi-
nate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
. The
. The