Pdf417 Set Length 1 - Datalogic PowerScan 9501-AR Series Product Reference Manual

Enter/Exit Programming Mode

PDF417 Set Length 1

Specifies one of the bar code lengths for
the minimum label length if in
length if in Fixed Length Mode. Length includes the bar code's data charac-
ters only. Characters can be set from 0001 to 2,710 characters (pad with
zeroes) in increments of 01. Any value greater than 2,710 will be considered
to be 2,710.
See page 289
Select PDF417 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
192
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
PDF417 Length
Variable Length Mode, or the first fixed
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
2D Global Features
Control. Length 1 is
repre-
CANCEL