Code 39 Set Length 1 - Datalogic PowerScan 9501-AR Series Product Reference Manual

Enter/Exit Programming Mode

Code 39 Set Length 1

This feature specifies one of the bar code lengths for
trol. Length 1 is the minimum label length if in
first fixed length if in
data characters only. The length can be set from 0 to 50 characters.
Table 4
instructions on setting this feature.
Table 4. Code 39 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 39 LENGTH 1 SETTING
Scan Two Characters
From Appendix D,
4
Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 39 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
110
Fixed Length
provides examples for setting Length 1. See
EXAMPLES
00 Characters
'0' and '0'
02 = Length 1 is 2 Characters
DEFAULT
Variable Length
Mode. Length includes the bar code's
07 Characters 15 Characters
'0' and '7' '1' and '5'
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Code 39 Length Con-
Mode, or the
page 289 for detailed
50 Characters
'5' AND '0'
CANCEL