Table of Contents
Advertisement
Enter/Exit Programming Mode
Radio Sleep
Disables the radio when the scanner is in standby mode in order to save the
battery power. When Radio sleep is enabled, the scanner cannot receive
asynchronous messages nor paging button requests from the base. The
scanner is still able to receive ACK From Host message. See
Transmit Mode"
DEFAULT
Radio Sleep = Sleep Enable
Changing System Speed
1. Link the PM9501-AR with a BC9xxx Base.
2. With the PM9501-AR, read a "Compatible Mode/Normal Mode Speed"
3. Place the PM9501-AR into the BC9xxx.
The Reader and Base will now be linked at the new programmed speed.
This feature can also be programmed using Datalogic Aladdin.
1. On the BC9xxx Base, change the Compatible mode parameter to low,
2. Place an unlinked PM9501-AR onto the BC9xxx base.
The Reader and base will link at the new programmed speed.
240
on page 239.
programming label on
intermediate, or high speed through Aladdin.
Radio Sleep = Sleep Disable
page 243
to set "Low, Medium, or High Speed".
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
"STAR Radio
Advertisement
Table of Contents
