Send Batch; Erase Batch Memory - Datalogic PowerScan 9501-AR Series Product Reference Manual

Send Batch

When the scanner is configured in Manual Batch Mode, use the following bar
code to initiate sending of labels stored in batch memory.

Erase Batch Memory

When the scanner is configured in Manual Batch Mode, use the following bar
code to erase any labels stored in batch memory.
Product Reference Guide
Do not scan an ENTER/EXIT PROGRAMMING MODE label in con-
junction with this bar code.
Send Batch
Do not scan an ENTER/EXIT PROGRAMMING MODE label in con-
junction with this bar code.
Erase Batch Memory
Enter/Exit Programming Mode
217