Enter/Exit Programming Mode
Code 93 Set Length 2
This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in
second fixed length if in
check, data, and full-ASCII shift characters. The length does not include
start/stop characters. The length can be set from 1 to 50 characters. A set-
ting of 0 specifies to ignore this length (only one fixed length).
Table 21
instructions on setting this feature.
Table 21. CODE 93 Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 93 LENGTH 2 SETTING
Scan Two Characters
From Appendix D,
4
Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
164
Fixed Length
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Variable Length
Mode. Length includes the bar code's
07 Characters
15 Characters
'0' and '7'
'1' and '5'
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Code 93 Length Con-
Mode, or the
page 290
for detailed
50 Characters
'5' AND '0'
CANCEL