Led And Beeper Indications - Datalogic PowerScan 9501-AR Series Product Reference Manual

Industrial corded and cordless handheld auto range area imager bar code reader
Table of Contents

Advertisement

LED and Beeper Indications

The reader's beeper sounds and its LED illuminates to indicate various func-
tions or errors on the reader. An optional "Green Spot" also performs useful
functions. The tables below list these indications. One exception to the
behaviors listed in the tables is that the reader's functions are programma-
ble, and may or may not be turned on. For example, certain indications such
as the power-up beep can be disabled using programming bar code labels.
Table 48.
INDICATION
Power-up
Beep
Good Read
Beep
Green Spot
flashes
momentarily
Image Cap-
ture
a. Except when in sleep mode or when a
Table 49. Programming Mode Indications
Programming Mode - The following indications ONLY occur when the reader is in Pro-
gramming Mode.
INDICATION
Label Program-
ming Mode Entry
Label Program-
ming Mode Rejec-
tion of Label
Label Program-
ming Mode Accep-
tance of Partial
Label
Product Reference Guide
LED and Beeper Indications
DESCRIPTION
The reader is in the pro-
cess of powering-up.
A label has been suc-
cessfully scanned by
the reader.
Upon successful read of
a
a label, the software
turns the green spot on
for the time specified by
the configured value.
When ready to capture
image
Good Read LED Duration
DESCRIPTION
A valid programming
label has been scanned.
A label has been rejected.
In cases where multiple
labels must be scanned
to program one feature,
this indication acknowl-
edges each portion as it is
successfully scanned.
LED and Beeper Indications
LED
Reader beeps four
times at highest fre-
quency and volume
upon power-up.
LED behavior for
The reader will beep
this indication is
once at current fre-
configurable via
quency, volume, tonal
the feature
"Good
setting and duration
Read: When to
upon a successful label
Indicate"
scan.
N/A
N/A
Blue light flashes 2
times when updat-
N/A
ing
other than 00 is selected
LED
LED blinks con-
tinuously
N/A
N/A
BEEPER
BEEPER
Reader sounds
four low frequency
beeps.
Reader sounds
three times at low-
est frequency &
current volume.
Reader sounds one
short beep at high-
est frequency &
current volume.
319

Advertisement

Table of Contents
loading

Table of Contents