Enter/Exit Programming Mode
See
page 304
features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can auto-
matically ensure they stay in sync with regard to application hardware and/
or configuration. See
Automatic Configuration Update = Enable
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the
scanner. Use this method when the Auto Configuration Update feature is
disabled and you want a one-time configuration update to be performed on
the scanner.
214
CONFIGURATION UPDATES
in "References" for detailed information and examples of these
page 304
for more information on this feature.
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Copy Configuration to Scanner
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Automatic Configuration Update = Disable
DEFAULT