Enable Character - Datalogic PowerScan 9501-AR Series Product Reference Manual

Industrial corded and cordless handheld auto range area imager bar code reader

Table of Contents

Enter/Exit Programming Mode

Enable Character

Specifies the value of the RS-232 host command used to enable the reader.

ASCII characters or any hex value from 0 to 0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host commands con-

flicts with normal operation of these characters.

Select Enable Character Setting

in "References" for more information on setting this feature.

0x45 = Enable Character is 'E'

PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR