Date-Time Separator - Datalogic PowerScan 9501-AR Series Product Reference Manual

Date-Time Separator

Sets the character used to separate Date and Time from the next field in
message.
DEFAULT
Set Character Separator =
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Enter/Exit Programming Mode
Disable Date-Time Separator
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by 2 digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
CANCEL
repre-
223