Table of Contents
Advertisement
Enter/Exit Programming Mode
QR Code Set Length 1
Specifies one of the bar code lengths for
is the minimum label length if in
length if in Fixed Length Mode. Characters can be set from 0001 to 7,089
characters in increments of 0001 (pad with zeroes).
See
page 289
Select QR Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
198
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
QR Code Length
Variable Length
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
2D Global Features
Control. Length 1
Mode, or the first fixed
repre-
CANCEL
Advertisement
Table of Contents
