Standard 2 Of 5 Set Length 1 - Datalogic PowerScan 9501-AR Series Product Reference Manual

Standard 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control. Length 1 is the minimum label length if in
the first fixed length if in
check and data characters. The length can be set from 1 to 50 characters.
Table 10
want detailed instructions on setting this feature.
Table 10. Standard 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 1 SETTING
Scan Two Characters
From Appendix D,
4
Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
01 Character
'0' and '1'
08 = Length 1 is 8 Characters
DEFAULT
Enter/Exit Programming Mode
Standard 2 of 5 Length
Variable Length
Mode. Length includes the bar code's
07 Characters 15 Characters
'0' and '7' '1' and '5'
CANCEL
Mode, or
page 289 if you
50 Characters
'5' AND '0'
133