Configuring The Base Station - Datalogic Gryphon Series Product Reference Manual
General purpose handheld area imager bar code reader
Hide thumbs
Also See for Gryphon Series:
- Quick reference manual (33 pages) ,
- Reference manual (20 pages)
Table of Contents
Advertisement
Setup
Figure 6. Other Interface Connections
RF Models
The power supply connects directly to the base (not on the cable's jack) for all configurations.
For all interfaces (except RS-232) a power supply is recommended but not necessary, because
the base can be powered from the Host. When the base is powered from the Host, select a slow
charge rate.
Configuring the Base Station
The base charger/station may be configured in desk application to hold the reader in two
different positions, either a horizontal or standing position, in order to provide the most
comfortable use depending on needs.
20
or...
or...
Specific cables are required for connection to different hosts. The connec-
tors illustrated above are examples only. Actual connectors may vary from
those illustrated, but the steps to connect the reader remain the same.
Standing
Configuring the Base Station
Horizontal
Gryphon™ I GD44XX/GBT4400/GM440X
Advertisement
Table of Contents
