Customizing Configuration Settings; Configure Interface Settings; Global Interface Features; Configuring Other Features - Datalogic PowerScan 9501-AR Series Product Reference Manual

Customizing Configuration Settings

Configure Interface Settings

If after scanning the interface bar code from the previous table, your instal-
lation requires you to select options to further customize your reader, turn
to the appropriate section for your interface type in
ters"

Global Interface Features

See "Global Interface Features" on page 25
interface types.

Configuring Other Features

If your installation requires different programming than the standard factory
default settings, the following sections of this manual allow configuration of
non-interface-specific settings you might require. Go to
Using Bar Codes, starting on page 23

Software Version Transmission

The software version of the device and of the base can be transmitted over
the RS-232 and Keyboard interfaces by scanning the following labels.

Battery Health

Battery Health can be transmitted by scanning the following label. The out-
put is expressed in percentage.
"Charge" represents the charging state. (100% means completely charged).
"Health" represents an estimation of the residual life of the battery. (100%
means a new battery).
Product Reference Guide
starting on page 23.
Customizing Configuration Settings
for settings configurable by all
for a complete list of available options.
Transmit Device Software Version
Transmit Base Software Version
Battery Health and Charge
"Configuration Parame-
Configuration
17