Table of Contents
Advertisement
CONFIGURE ACTIONS FOR FUNCTION KEYS
Each of the function keys can be programmed to perform a user-assigned
function. This is done by associating a function key with either a predefined
command or your own custom string. See the command
page 262
Each function key has an associated label which shows in the display when
active. The default labels are shown in the table below. To program the
function key labels, see
The following table shows the list of predefined commands and available
strings.
Table 27. Keyboard Programming
CMD_ID
Name
0
Not configured
1
Enter CMD
2
String 1
3
String 2
4
String 3
5
String 4
6
String 5
7
Backlight CMD
8
Clear CMD
9
Backspace CMD Same as Backspace key.
A
Recall
Show Date/
B
Time
C
Scroll Up
D
Scroll Down
E
Dot char
Dynamic
F
Quantity
Product Reference Guide
to define customized strings.
"Set String ID" on page
Function
Not configured action.
If a key must be kept enabled but isn't required
in normal mode , this function can be selected
to keep it ineffective. Whenever an unconfig-
ured function key is pressed, an error message
appears on the display and an error beep is
emitted.
Same as ENTER_KEY.
Display and transmit string 1.
Display and transmit string 2.
Display and transmit string 3.
Display and transmit string 4.
Display and transmit string 5.
Toggle backlight on/off.
Clears the screen
If pressed once, it recalls the last code sent
out.
If pressed twice, resends the last code.
Display the internal date, time.
Scroll up display content by row
Scroll down display content by row
Display dot [.] char
Dynamic Quantity Code function
Enter/Exit Programming Mode
"Define Strings" on
263.
Default
16K
Label
<None>
Ent
S1T
S2T
S3T
S4T
S5T
Blt
CLR
Rcl
Tim
Up
Dwn
[.]
Qty
4K
257
Advertisement
Table of Contents
