Micro Pdf417 Length Control; Micro Pdf417 Set Length 1 - Datalogic PowerScan 9501-AR Series Product Reference Manual

2D Global Features

Micro PDF417 Length Control

This feature specifies either variable length decoding or fixed length decod-
ing for this symbology.
Variable Length:
length may be set.
Fixed Length:
DEFAULT
Micro PDF417 Length Control = Fixed Length

Micro PDF417 Set Length 1

Specifies one of the bar code lengths for
Length 1 is the minimum label length if in
fixed length if in Fixed Length Mode. Length includes the bar code's data
characters only. Characters can be set from 0001 to 0366 characters (pad
with zeroes) in increments of 01. Any value greater than 0366 will be con-
sidered to be 0366.
See page 289
Select Micro PDF417 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
For variable length decoding, a minimum and maximum
For fixed length decoding, two different lengths may be set.
for detailed instructions on setting this feature.
0001 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
Micro PDF417 Length Control = Variable Length
Micro PDF417 Length
Variable Length
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
Appendix D, Keypad
meric characters in
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
CANCEL
Control.
Mode, or the first
repre-
195