Keypad - Datalogic PowerScan 9501-AR Series Product Reference Manual

Enter/Exit Programming Mode
Default settings are indicated at each feature/option with a green arrow.
Also reference
widely used set of standard factory settings.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicable
2. Scan the correct bar code to set the desired programming feature or
3. If additional input parameters are needed, go to
4. Complete the programming sequence by scanning the ENTER/EXIT
84
on page 139
C IATA
ODE
on page 140
C
ODABAR
ABC C
ODABAR
on page 149
C 11
ODE
GS1 D B
ATA AR
GS1 D B
ATA AR
GS1 D B
ATA AR
on page 160
C 93
ODE
on page 166
MSI
on page 170
P
LESSEY
Appendix C, Standard Defaults
programming pages.
parameter. You may need to cover unused bar codes on the page, and
possibly the facing page, to ensure that the reader reads only the bar
code you intend to scan.
and scan the appropriate characters from the keypad.
Additional information about many features can be found in the "Ref-
erences" chapter.
If you make a mistake before the last character, scan the CANCEL bar
code to abort and not save the entry string. You can then start again
at the beginning.
PROGRAMMING bar code to exit Programming Mode.
on page 146
™ O
MNIDIRECTIONAL
on page 154
™ E
XPANDED
on page 159
™ L
IMITED
for a listing of the most
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
on page 153
Appendix D,

Keypad,